| |
Gear Oil:
RPL-OL Series
The RPL-OL series of gear oils are blended using 100%
Synthetic PAO and Ester base fluids with specially
designed additives for long lasting gear lubrication
under severe operating conditions and over a wide
temperature range. They provide for substantial
reductions in friction, power consumption and operating
temperatures.
RPL-OL gear oils have high Viscosity Indices which is an
excellent characteristic in a gear oil because the
higher the V.I., the less likely will the viscosity
reacts to changes in temperature from factors including
start-up, initial loading, operating load and spikes in
temperature. High V.I. oils tend not to lose viscosity
as a result of things like mechanical shearing, even in
heavily loaded gear applications, and this provides for
increased protection for your gear applications. RPL-OL
gear oils are extremely stable at elevated temperatures
and resist the oxidation and thermal degradation that
occurs in more conventional oils.
RPL-OL gear oils are recommended for industrial bearings
and gears operating over a wide temperature range. They
are recommended for lubrication of industrial hypoid
type gears, gears subjected to shock loading,
transmission gear cases and worm drive axles on mobile
contractor type equipment including open pit and
underground mining machinery. They also provide superior
lubrication of enclosed gear drives and reducers from
fractional horsepower gear motors to large horsepower
units on rolling mills and mine hoists with a wide
variety of gears including spur, bevel, herringbone and
worm types.
• High EP and anti-wear properties
• Excellent film strength and adhesion to metal surfaces
• High viscosity indices
• Non-foaming
• Excellent demulsibility - separates readily from water
• High temperature oxidation and thermal stability
• Long lubricant life
• Extended oil drain intervals
• Wide high/low operating temperature ranges.
| PROPERTY |
RPL-OL150 |
RPL-OL220 |
TEST |
| ISO Grade |
150 |
220 |
-- |
| Colour |
Amber |
Amber |
-- |
Viscosity,
cSt@40°C |
140.4 cSt |
210.5 cSt |
ASTM D445 |
Viscosity,
cSt@100°C |
19.2 cSt |
26.4 cSt |
ASTM D445 |
| Viscosity Index |
156 |
160 |
ASTM D2270 |
| Flash Point |
232°C/ 450°F |
237°C / 460°F |
ASTM D92 |
| Pour Point |
-51°C / -60°F |
-45°C / -50°F |
ASTM D97 |
| Rust Test |
Pass |
Pass |
ASTM D665 |
Copper Corrosion
24hrs@100°C |
Pass |
Pass |
ASTM D130 |
| 4-Ball EP Test |
250 kg |
250 kg |
ASTM D2783 |
| 4-Ball Wear Test |
0.30 mm |
0.30 mm |
ASTM D2266 |
| Timken EP Test |
60 lbs |
60 lbs |
ASTM D2782 |
| FZG Gear Test, 12 Stages |
Pass |
Pass |
-- |
| Foam Characteristics |
0 / 0 / 0 |
0 / 0 / 0 |
ASTM D892 |
Specific Gravity
(Water = 1.0) |
0.870 |
0.870 |
ASTM D1298 |
| Air Release @90°C |
-1.8 minutes |
-1.8 minutes |
-- |
| PROPERTY |
RPL-OL320 |
RPL-OL460 |
TEST |
| ISO Grade |
320 |
460 |
-- |
| Colour |
Amber |
Amber |
-- |
Viscosity,
cSt@40°C |
311.3 cSt |
445.7 cSt |
ASTM D445 |
Viscosity,
cSt@100°C |
34.6 cSt |
44.2 cSt |
ASTM D445 |
| Viscosity Index |
156 |
154 |
ASTM D2270 |
| Flash Point |
243°C / 470°F |
248°C / 480°F |
ASTM D92 |
| Pour Point |
-40°C / -40°F |
-40°C / -40°F |
ASTM D97 |
| Rust Test |
Pass |
Pass |
ASTM D665 |
Copper Corrosion
24hrs@100°C |
Pass |
Pass |
ASTM D130 |
| 4-Ball EP Test |
250 kg |
250 kg |
ASTM D2783 |
| 4-Ball Wear Test |
0.30 mm |
0.30 mm |
ASTM D2266 |
| Timken EP Test |
60 lbs |
60 lbs |
ASTM D2782 |
| FZG Gear Test, 12 Stages |
Pass |
Pass |
-- |
| Foam Characteristics |
0 / 0 / 0 |
0 / 0 / 0 |
ASTM D892 |
Specific Gravity
(Water = 1.0) |
0.880 |
0.880 |
ASTM D1298 |
| Air Release @90°C |
-1.8 minutes |
-1.8 minutes |
-- |
|
* Please note: The information, data and tables contained in this
website have been carefully edited at the time of publication. However, no
responsibility for possible errors or omissions can be assumed. We recommend
contacting our Application Support Staff to discuss your specific
requirements. We are constantly updating our products therefore technical
data and specifications may change at any time without notice. 08/2017
|
Follow regular lubrication instructions as provided with
original equipment. It is recommended to thoroughly
drain and clean systems prior to switching over. RPL-OL
gear oils contain esters which may not be fully
compatible with all materials and are not recommended
for certain types of seals, paints and plastics. The
proper type of grade of gear oil is important to the
performance and life of a gear set. Selection of the
correct lubricant viscosity is based on speed, load,
operating temperatures and gear geometry.
| Size |
Metric |
US Imperial |
| Gallon |
3.79 L / 3.4 kg |
1gal / 7.5 lbs |
| Pail |
18.93 L / 16 kg |
5 gal / 35 lbs |
| Keg |
56.78 L / 54 kg |
15 gal / 120 lbs |
| Drum |
208.20 L / 181 kg |
55 gal / 400 lbs |
|
* NB: Sizes and weights are approximate. |
|
Selecting the correct gear oil for your application
can be extremely challenging and confusing.
There is a very broad range of products and price
ranges in the marketplace.
So how do you know which is the right one? The
answer is: it depends on your specific application.
Factors including temperature, load, contaminants, lube intervals,
speed, food grade
requirements, and the operating environment usually
set the stage for the type of gear oil protection
you need.
Contact us to help you match the correct product ,
at the appropriate price range, for your specific
application.
Material Safety
Data Sheets
 RPL-OL
Series
|
|
