Providing Precision Lubricants and Lubrication Solutions

     
 

Flake Graphite Oven Chain Oil: RPL-BAKOIL200

Product Description:

The RPL-Bakoil-200 is an oven chain lubricant that is blended using 25% premium flake graphite compounds suspended in an odorless petroleum solvent. The base solvent evaporates quickly leaving a long lasting heat-resistant solid film on all moving mechanisms. Rollers are free to rotate and chain linkages are free to hinge.

The Bakoil-200 is designed to withstand heavy loads while reducing friction and wear, therefore extending the life of oven chains and reduce maintenance costs. The product will not cause excessive smoking or hard build-ups on chains or rails.

Bakoil-200 should be applied to a COOL chain by brush, oilcan or automatic applicator with agitator. Applied properly, the Bakoil-200 should reduce overall amperage consumption and chain wear. For best results and safety, we recommend you follow application procedures, with special caution regarding temperature since this can be a combustible mixture under certain conditions.
 

Features and Benefits:

• The base fluid evaporates quickly leaving a long lasting heat-resistant solid film on all moving mechanisms

• Withstands heavy loads

• Excellent penetrating ability

• Economically priced

• Uniquely suited for the Bakery Industry

 

Typical Operating Properties:

PROPERTY RPL-BAKOIL200 TEST
Flash Point 63°C / 145°F ASTM D92
Base Carrier Fluid Odourless Petroleum Solvent --
Primary Ingredient 25% Flake Graphite --

* Please note: The information, data and tables contained in this website have been carefully edited at the time of publication. However, no responsibility for possible errors or omissions can be assumed. We recommend contacting our Application Support Staff to discuss your specific requirements. We are constantly updating our products therefore technical data and specifications may change at any time without notice. 08/2017

Method of Application:

1) Mix thoroughly prior to application.

2) Before application, ensure that all gas burners, pilot lights and any other source of ignition and heat are extinguished.

3) Keep exhaust fans running and open inspection doors and steam dampers before and during application.

4) Ensure that oven temperature is below 250°F before applying.

5) Use as supplied.

6) If portions of a container is transferred to another container, please ensure that it is well mixed before transfer to allow for proper transfer of entire solids content.

7) Continue ventilation until all vapors are eliminated and keep oven doors open after lubrication and until baking temperature is reached.

8) Maintain containers and keep well-sealed between applications.

9) This lubricant is NOT intended for direct food contact. Care should be used to avoid incidental contact. 

Available Container Sizes:

Size Metric US Imperial
Gallon 3.79 L / 3.4 kg 1gal / 7.5 lbs
Pail 18.93 L / 16 kg 5 gal / 35 lbs
Keg 56.78 L / 54 kg 15 gal / 120 lbs
Drum 208.20 L / 181 kg 55 gal / 400 lbs
* NB: Sizes and weights are approximate.

 




 

Did you know?

The majority of chains fail from the inside. They stretch or kink due to wear and corrosion inside the pin and bushing area.

To lubricate effectively, chain oils must be carefully engineered to penetrate and clean the inside of the chain,  removing contaminants and any trapped water, and leaving behind a heavy film of oil, grease or solid lubricant..

 

Material Safety
Data Sheets
 

RPL-Bakoil200
 

  
 

____________________

 • Go to: Index - Oil - Chain
 • Return to: Last Page
 • Return to: Home Page
 

  

© Davley Darmex Precision Lubricants, 2024