Providing Precision Lubricants and Lubrication Solutions

     
 

Water Resistant Grease: RPL-802-Red (Discontinued)

Product Description:

RPL-802-Red is a heavy-duty water resistant grease manufactured using a highly refined and hydro-treated paraffin base oil thickened with aluminum complex. It contains EP additives for heavy duty anti-wear and extreme pressure water resistant protection in heavy impact and pounding conditions. It has a high viscosity index and a high dropping point, is non-corrosive and has good oxidation stability.

RPL-802-Red is tacky. It stays where it is applied and resists fling-off from bearings and fittings. It provides extra-cushioning to reduce shock, noise, friction and wear. It offers excellent water resistance. It repels water and acts as seal for bearings exposed to wet conditions. The aluminum complex thickener contains fibers which contribute to the unusually stable structure. The product does not soften or run-out in the presence of water and other liquids, even when subjected to prolonged and severe working conditions.

This particular grease is ideally suited for all types of slow to moderate speed indoor and outdoor applications subjected to heavy-duty pressures and shocks including bearings, cams, slides, gears and a range of stationary and mobile equipment, especially when the use of grease with MoS additives are inappropriate. Typical applications include marine, mining, pulp, paper and forestry machinery.
 

Features and Benefits:

• Excellent water resistance

• Contains polymer additives for heavy-duty anti-wear and EP protection

• Provides extra-cushioning to reduce shock, noise, friction and wear

• Resists fling-off

• Blocks out dirt, powder, solid and liquid contaminants

• Wide operating temperature range

• High viscosity index and oxidation stability
 

Typical Operating Properties:

PROPERTY RPL-802-Red TEST
NLGI Grade 2 --
Colour Red --
Thickener Aluminum Complex --
Penetration, Worked
60 Strokes (0.1mm)
271 ASTM D217
Dropping Point 285C / 550F ASTM D2265
Base Oil Viscosity
cSt@40C
194.2 cSt ASTM D445
Viscosity
cSt@100C
17.4 cSt ASTM D445
Viscosity Index 110 --
Pour Point -12C / 10F --
Flash Point 210C / 410F --
Rust Test Pass ASTM D1743
Oxidation Stability(psi loss) 3.0 ASTM942
Water Washout (% wt. loss) 0.10 ASTM D1264
Copper Corrosion
24hrs@100C
0.900 ASTM D854
4-Ball Weld Load 500 kg ASTM D2596
4-Ball Wear .55 mm ASTM D2266
Timken Load 85 lbs ASTM D2509
Specific Gravity 0.950 ASTM D854
Operating Temperature Range Low -12C / 10F --
High 200C / 400F --

* Please note: The information, data and tables contained in this website have been carefully edited at the time of publication. However, no responsibility for possible errors or omissions can be assumed. We recommend contacting our Application Support Staff to discuss your specific requirements. We are constantly updating our products therefore technical data and specifications may change at any time without notice. 03/2010

Method of Application:

No special handling precautions are required. Follow regular maintenance instructions as provided with original equipment.

Available Container Sizes:

Size Metric US Imperial
Cartridge 0.41 L / 400 g 14 US fluid ounces / 0.88 lbs
Pail 18.93 L / 16 kg 5 gal / 35 lbs
Keg 56.78 L / 54 kg 15 gal / 120 lbs
Drum 208.20 L / 181 kg 55 gal / 400 lbs
* NB: Sizes and weights are approximate.

 




 

Did you know?

Most greases will offer at least some basic degree of water protection.

However, it takes a careful combination of base fluids and additives to formulate a product that not only will protect an application, but also provide continuous and effective lubrication under constant  exposure without breaking down.


 

Material Safety
Data Sheets
 

RPL-802-Red



 

 
 

____________________

 • Go to: Index - Water Resistant Grease
 • Return to: Last Page
 • Return to: Home Page
 

 

Davley Darmex Precision Lubricants, 2011