Providing Precision Lubricants and Lubrication Solutions

     
 

Brick Grease: RPL-1572

Product Description:

RPL-1572 is a high-melting, long-lasting sodium block grease that exhibits good heat resistance and is typically used in applications where an even film of grease protection is required along a shaft to virtually eliminate the danger of dry bearings.  

RPL-1572 is typically used in pebble mills, cement mills, paper mills, crushers, rolling mills, rubber compounding mills and for jack-shaft bearings. 
 

Features and Benefits:

• Good resistance to heat

• Eliminates dry bearings

• Excellent water resistance

• Good load protection

• Wide Temperature Range, 0 to 300 F (-18 to 150C)
 

Typical Operating Properties:

PROPERTY RPL-1572 (Brick) TEST
Colour Dark Brown --
Thickener Sodium Stearate --
Thickener Content 24-28% --
Texture Smooth Solid Brick --
Penetration, Unworked
60 Strokes (0.1mm)
60 ASTM D217
Base Oil Viscosity
cSt@40C
125 cSt ASTM D445
Viscosity
cSt@100C
10.2 cSt ASTM D445
Viscosity Index 50 ASTM D2270
Pour Point -22C / -35F ASTM D97
Flash Point 227C / 440F ASTM D92
Dropping Point 163C / 325F ASTM D2265
Operating Temperature Range Low -18C / 0F --
High 150C / 300F --

* Please note: The information, data and tables contained in this website have been carefully edited at the time of publication. However, no responsibility for possible errors or omissions can be assumed. We recommend contacting our Application Support Staff to discuss your specific requirements. We are constantly updating our products therefore technical data and specifications may change at any time without notice. 08/2017

Method of Application:

No special handling precautions are required. Follow regular maintenance instructions as provided with original equipment. Typically applied by open well top feeds, taking care to ensure that the pieces of brick are small enough to allow free movement and to prevent binding or jamming.
 

Available Container Sizes:

Various sizes on request. 
 

 




 

Did you know?

Brick grease is typically applied by open well top feeds.  It is important to take care to ensure that the pieces of brick are small enough to allow free movement and to prevent binding or jamming.


 

Material Safety
Data Sheets
 

RPL-1572_Brick



 

 
 

____________________

 • Return to: Last Page
 • Return to: Home Page
 

 

Davley Darmex Precision Lubricants, 2011